Flame Scanner Compact Version

KLC 11

UV Flame Scanner Compact Version for single burner systems with internal safety check.

  • Compact design
  • Transistor output
  • Easy replacement possible on site
  • Insensitive to daylight
  • Can be used directly instead of the ionization probe or the LDR
Catalog Get a quote Contact us

The KLC 11 is a UV Flame Scanner Compact Version designed for single flame combustion and produces little light or radiation in the visible spectrum and has a very low flame modulation / flicker frequency. The design of the UV sensor ensures that the Flame Scanner Compact Version does not react to background radiation from hot refractory material or any other infrared light source.

The UV Flame Scanner Compact Version is equipped with an optical interface that visibly displays the intensity of the flame signal. The KLC 11 can be connected directly to the ionization or LDR input of the control box. Its dimensions and connectivity are compatible with other KLC Flame Scanners Compact Version in the series. All KLC accessories are identical. This reduces the variety of components used in production and simplifies application and service on site.

The KLC 11 UV Flame Scanner Compact Version was developed to meet the requirements of UL 372-2, CSA C22.2 and EN 298:2012-11. The internal increase in UV tube voltage immediately after the supply voltage is applied ensures the safety requirements for testing the UV tube until ignition occurs. A simple change from the ionization flame control to the KLC 11 is therefore also permitted for control boxes without their own UV tube input.

The KLC 11 UV Flame Scanner Compact Version must be switched off for longer than 5 seconds before burner operation can be resumed.

Accessories

Everything you need

Do you have a question about our service portfolio, need planning support for a project or are you looking for a specialist in flame monitoring? Then please contact us.

The read-out unit UVT-COM is the interface for transmitting signals from the LEDs of KLC10, KLC1000, KLC11, KLC1001, IFX11 and IFX50 to the BST-Com software.
Learn more
Heat-insulated adapter for direct installation on the firebox.
Learn more
With the optionally available angle adapter, the radial alignment of the KLC 20 or KLC 21 to the flame axis is carried out using an optimally shaped mirror surface.
Learn more
In addition to our standard range, we also offer customer-specific solutions for the optimum connection of flame monitors to automatic burner controls.
Learn more
Various fastening devices provide a secure fit on burner parts.
Learn more
For checking the KLC 20/21 and KLC 2002 series
Learn more
The flame detector relay module converts the output signal of the KLC series flame detectors into a potential-free switching output.
Learn more
Link to: Homepage

BFI AUTOMATION GmbH
Ruegenstrasse 7
42579 Heiligenhaus

Follow a manual added link

a part of Livitron Group

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.